323002524 - 1060G42 SWITCH ON CLUTCH PEDAL - R.R. (JTD ENGINES)

Removing ( Refitting )

The clutch pedal switch must be replaced each time it is removed.

1. Disconnect the electrical connection for the clutch pedal switch.

	Description	Connector
1	CLUTCH PEDAL SWITCH	See I031 CLUTCH PEDAL SWITCH

2. Press the clutch pedal, turn clockwise and remove the switch from the pedal unit mounting. Refitting ( Removing )

The new clutch pedal switch from the Parts Dept. is supplied with the push rod already in the correct position.

- Press the clutch pedal, fit the new switch in the special splining and lock it by rotating it in an anti-clockwise direction until the retaining tooth can be heard to click into place.- Release the clutch pedal.- Connect the electrical connection for the clutch pedal switch.

	Description	Connector
-	CLUTCH PEDAL SWITCH	See I031 CLUTCH PEDAL SWITCH