323002533 - 1820B56 RIGID PIPE FROM VIBRATION DAMPER TO SLAVE CYLINDER - R R

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1820B58 CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R 1. Undo the connector and separate the hose from the rigid pipe.
1. Open retaining clips (1a), lift up retaining clip (1b), disconnect flexible pipe (1c) and remove it complete with rigid pipe (1d) from the three-way connector.
Refitting ( Removing ) - Connect the rigid pipe to the hose and tighten the connector.    Op. 1820B58 CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR