7210B40 R.R. REAR INNER WHEEL ARCH - Fiat - LINEA - eLearn

323002943 - 7210B40 R.R. REAR INNER WHEEL ARCH

) Op. 7210E28 R.R. ROOF PANEL Op. 7210E52 R.R. REAR WING Op. 7210B50 R.R. REAR WING LOWER FRAME Op. 7210B35 R.R. REAR OUTER WHEEL ARCH Op. 7210B75 R.R. REAR LIGHT CLUSTER HOUSING Op. 7210B51 R R UPPER CHANNEL STIFFENER, (ONE) LH OR RH Op. 7210E54 R.R. BOOT - Ensure that the components connected are not distorted by checking the body alignment measurements with suitable equipment (reference rigs, templates or gauges).- Straighten the body as necessary.

- Use a rotary brush to remove the paint and gain access to the spot welds.1. Use the drill and chamfer the spot welds not accessible with the chamfering machine.- Use a hammer and chisel to remove the previously chamfered spot welds.

- Remove the spot weld residues using a disc grinder- Use a rotary brush to clean the previously treated areas.1. Apply electro-weldable paint.

Refitting ( Removing

) 1. Remove the anti-corrosion treatment from the entire perimeter of the inside and outside of the replacement part using a rotary brush.- Drill the replacement part at the points that are not accessible using the spot welder.- Apply electro-weldable paint to the edges involved.

1. Position the replacement part correctly on the vehicle and secure it using self-locking clamps.- Check the alignment and the surrounding gaps.2. Use a MIG welder to fill weld the openings made previously.

- Correct any distortions to the panel using a mallet and dolly block.1. Use a disc grinder to level the welds.- Use a rotary brush to clean the previously welded areas.

1. Apply anti-oxidant protection to the areas involved in the welding.- Seal the join lines between the replacement part and the vehicle after having applied primer.

Op. 7210E54 R.R. BOOT Op. 7210B51 R R UPPER CHANNEL STIFFENER, (ONE) LH OR RH Op. 7210B75 R.R. REAR LIGHT CLUSTER HOUSING Op. 7210B35 R.R. REAR OUTER WHEEL ARCH Op. 7210B50 R.R. REAR WING LOWER FRAME Op. 7210E52 R.R. REAR WING Op. 7210E28 R.R. ROOF PANEL