323003554 - 3330B04 PEDAL UNIT - R.R. FOR VERSIONS WITH MANUAL GEARBOX WITH HYDRAULIC SELECTION

Removing ( Refitting ) - Disconnect the negative battery terminal.- Disconnect the electrical connection for the accelerator pedal.

	Description	Connector
-	ACCELERATOR PEDAL POTENTIOMETER	See K055 ACCELERATOR PEDAL POTENTIOMETER

- Disconnect the electrical connection for the brake pedal switch.

	Description	Connector
-	BRAKE PEDAL SWITCH	See I030 BRAKE PEDAL SWITCH

1. Working at the rear of the brake pedal, press the retaining tabs (1a) securing the brake servo push rod (1b) to the brake pedal (1c). 1. Remove the retaining device (1a), then release the brake servo push rod (1b) from the brake pedal (1c) and keep the brake servo push rod spherical head housing cover (1d).

Always replace the retaining device (1a) for the brake servo push rod each time it is removed, even if it appears to be undamaged.

1. Undo the bolt (1a) and disconnect the steering column (1b) from the steering box pinion. 1. Undo the nuts securing the pedal mounting to the brake servo and to the bodyshell.2. Remove the pedal unti complete with support. Refitting ( Removing ) - Place the pedal assembly in position and secure it to the brake servo and to the bodyshell tightening the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Pedal unit mounting	Nut	M8	1.7 ÷ 2.6

Component	Fastening	dia	Value (daNm)	Validity
Brake servo	Nut	M8	1.7 ÷ 2.6

1. Fit the new retaining device (1a) on the brake pedal (1b) so that the fastening clips (1c) are secured; position the brake servo push rod spherical head housing cover (1d).

Always replace the retaining device (1a) for the brake servo push rod each time it is removed, even if it appears to be undamaged.

- Retract the brake servo slightly, lift up the brake pedal and position the brake servo push rod by the retaining device.- Press the brake pedal to fit the brake servo push rod on the retaining device.- Connect the steering column to the steering box pinion tightening the bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering column to steering box pinion	Bolt	M10	5.0 ÷ 6.0

- Connect the electrical connection for the brake pedal switch.

	Description	Connector
-	BRAKE PEDAL SWITCH	See I030 BRAKE PEDAL SWITCH

- Connect the electrical connection for the accelerator pedal switch.

	Description	Connector
-	ACCELERATOR PEDAL POTENTIOMETER	See K055 ACCELERATOR PEDAL POTENTIOMETER

- Connect the negative battery terminal (-).