323003615 - 2127C24 PIPE FROM SOLENOID VALVE ASSEMBLY TO MASTER CYLINDER FOR ELECTROHYDRAULIC SELECTION GEARBOX - R.R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Connect an Examiner and run the depressurization procedure.1. Undo the connector (1a) for the rigid oil supply pipe to the master cylinder (1b), valve assembly side.2. Undo the bolt for the bracket retaining the pipe from the valve assembly to the master cylinder. 1. Undo the connector (1a) and remove the rigid oil supply pipe to the maseter cylinder (1b). Refitting ( Removing ) - Place the rigid oil supply pipe to the master cylinder in position and tighten the connector.- Tighten the bolt for the bracket retaining the pipe from the valve assembly to the master cylinder.- Tighten the connector for the rigid oil supply pipe to the master cylinder, valve assembly side.    Op. 0010T48 HYDRAULIC SYSTEM FOR GEARBOX WITH HYDRAULIC SELECTION - BLEED AIR     Op. 0010T47 HYDRAULIC SYSTEM FLUID FOR GEARBOX WITH HYDRAULIC SELECTION CHECK LEVEL AND TOP UP, IF NECESSARY     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Remove the vehicle from the lift.