323001153 - 1080B95 REAR LAMBDA SENSOR TO CATALYTIC CONVERTER - R.R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. 1. Disconnect the electrical connection for the rear Lambda sensor to the catalytic converter.
DescriptionConnector
1Lambda sensor on catalytic converter    See K017 LAMBDA SENSOR ON CATALYZER
- Open the intermediate clip retaining the rear Lamba sensor wiring to the catalytic converter.
1. Unscrew and remove the rear Lambda sensor from the catalytic converter.
Refitting ( Removing ) - Refit the rear Lambda sensor in its housing on the catalytic converter and tighten it to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Lambda sensor-M184.1 ÷ 5.01.4 8v1.4 16v TJET1.3 Multijet
- Connect the electrical connection for the rear Lambda sensor to the catalytic converter.
DescriptionConnector
-LAMBDA SENSOR ON CATALYTIC CONVERTER    See K017 LAMBDA SENSOR ON CATALYZER
- Close the intermediate clip retaining the rear Lamba sensor wiring to the catalytic converter.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Remove the vehicle from the lift.