323000056 - 5530B22 BATTERY EARTH LEAD - R+R

Removing ( Refitting ) - Position the vehicle on the lift.- Open the bonnet.1. Disconnect negative terminal (1a) from the battery, having loosened it by rotating cam lever (1b).

Take care whilst opening the lever on account of the release device.

	Description	Connector
1a	BATTERY	See A001 BATTERY

2. Undo the nut (2a) and disconnect the earth lead (2b) from the anchorage on the left knuckle.

	Description	Connector
2b	BATTERY EARTH ON BODY	See BATTERY EARTH ON BODYSHELL

1. Undo the bolt (1a) and disconnect the earth lead (1b) from the gearbox.

	Description	Connector
1b	BATTERY EARTH ON ENGINE	See C002 BATTERY EARTH ON ENGINE

2. Keep the battery earth lead. Refitting ( Removing ) - Check that the battery earth lead is not damaged and test the electrical continuity.1. Position earth connection (1a) on the gearbox and secure with bolt (b).

Component	Fastening	dia	Value (daNm)	Validity
Earth lead on gearbox	Nut	M8	1.2 ÷ 1.8

1. Position the anchorage (1a) on the left knuckle and secure with the nut (1b).

Component	Fastening	dia	Value (daNm)	Validity
Battery earth lead on strut	Nut	M8	1.2 ÷ 1.8

2. Make sure that the release/attachment lever is in the opening position.3. Fit the terminal on the battery pole and press it down fully.4. Tighten lever (4a) and check that lead (4b) follows the correct path without setting up tension or having to be forced.

Exert a slight pulling force to check that the terminal is correctly attached.

- Close the bonnet.- Test the operation of the electrical system.