323000167 - 7005M27 ELECTRIC WINDOW MECHANISM FOR ONE FRONT DOOR LH OR RH - R.R WITH SUPPORT FRAME REMOVED

Removing ( Refitting )     Op. 7005A05 FRONT SIDE DOOR WATER GUARD PROTECTION - R.R. OR POSITION1. Provisionally connect the window switch unit to the connection (1a), then move the window (1b) until the glass retainer (1c) is in an accessible position (as in the figure).2. Release the retainer (1c) from the window drive pin (2a).3. Disconnect the opening (3a) for the window from the pin (2a).
1. Raise the window (1a) until it is in the end of travel position, then secure it using a retainer (1b).2. Detach the electrical connection.
DescriptionComponent
LEFT FRONT ELECTRIC WINDOW MOTOR    See N060 DRIVER'S FRONT ELECTRIC WINDOW MOTOR
RIGHT FRONT ELECTRIC WINDOW MOTOR    See N061 RIGHT FRONT ELECTRIC WINDOW MOTOR
3. Loosen the nuts fixing the window opening mechanism.
1. Extract the window opening mechanism.
Refitting ( Removing ) - Check that the window opening mechanism is not damaged.- Place the window opening mechanism in position and screw in the nuts without tightening them.Secure the electrical connection.- Remove the retainer and lower the window, then insert the opening in the drive pin.- Insert the retainer in the drive pin.    Op. 7005M25 FRONT SIDE DOOR ELECTRICALLY OPERATED WINDOW MECHANISM - CHECK POSITION AND FASTENING    Op. 7005A05 FRONT SIDE DOOR WATER GUARD PROTECTION - R.R. OR POSITION