323000694 - 7045D31 FRONT SEAT BACKREST COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED
Removing ( Refitting ) Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R 1. Open zip fastener (1a) along entire section (1b).2. Disconnect the lower two ends of the backrest trim attached to one another.3. Raise the backrest trim as far as possible.
1. Undo retainers (1a) and withdraw head restraint bushes (1b).2. Remove the backrest trim with padding (2b) from seat frame (2a).
- If necessary, separate the backrest trim from the padding, as described below.1. Prise up the trim by releasing from the padding edge.2. Use cutters to cut all the front backrest trim retainers.3. Separate trim (3a) from padding (3b).
Refitting
(
Removing
)
- Check that the backrest trim is not damaged.- If removed, position the backrest trim on the padding and crimp the retainers using special pliers.
Mould the cover on the padding during the various refitting stages. |
Both head restraint bushes have different retainers and engagement seats. |