7210E10 R.R. FRONT BUMPER - Fiat - LINEA - eLearn

323000752 - 7210E10 R.R. FRONT BUMPER

) - Position the vehicle on the lift.- Open the bonnet lid and raise the vehicle.1. Working from both sides of the vehicle, undo bolts (1a) and plastic nut (1b) securing front wheel arch (1c).

1. Move wheel arches (1a) slightly and undo side bolts (1b) securing the bumper.

1. Move wheel arch (1a) slightly and disconnect electrical connection (1b) for fog lights (1c).

	Description	Connector
1b	LEFT FOG LIGHT	See F015 LEFT FOG LAMP
1b	RIGHT FOG LIGHT	See F016 RIGHT FOG LAMP

1. Undo the lower bolts securing the bumper.

- Lower the vehicle.1. Undo the upper bolts securing the bumper.2. Remove the bumper.

- If necessary, strip the bumper. Op. 7205E10 STRIPPING FRONT BUMPER

Refitting ( Removing

) - Check that the bumper is not damaged.- If necessary, reassemble the bumper.1. Position bumper (1a) in its seat and fasten pins (1b) in their seats on both sides.2. Move wheel arch (2a) slightly and undo side bolts (2b) securing the bumper.

- Tighten the upper bolts securing the bumper.- Raise the vehicle and tighten the lower bumper bolts.- Connect the electrical connection for the fog light.- Tighten the front wheel arch nuts and bolts.- Lower the vehicle and reclose the bonnet lid.- Remove the vehicle from the lift.- If necessary, adjust the foglamp. Op. 5540D38 FOG LIGHT BEAM - ADJUST