| 1 | FUEL RESERVE WARNING LIGHT CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the fuel reserve warning light is off. | Move on to Step 2 | Fuel reserve warning light on. | Top up the fuel level so that it is not in the reserve zone. |
| 2 | FUEL LEVEL CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the fuel level gauge is working properly. | Move on to Step 3 | Fuel level gauge not working. | Continue following the instructions on the diagnostic equipment. |
| 3 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Connect the diagnostic equipment and check:- that the misfire error is not present. | End of diagnosis. | The misfire error is present. | Continue following the instructions on the diagnostic equipment. |
| 4 | ERROR CANCELLING AND CHECK | All OK | Problems encountered | Operation |
|---|
| Using the diagnostic equipment, cancel the errors in the control unit. | Move on to Step 5 | The misfire error is present. | Continue following the instructions on the diagnostic equipment. |
| 5 | CORRECT OPERATION CHECK | All OK | Problems encountered | Operation |
|---|
| Road test the vehicle and check that the error does not occur again. | End of diagnosis. | The fault persists. | Contact technical service for further information on the problem. |
