323000807 - K052 VEHICLE PROTECTION WARNING LIGHT ON (ENGINE DOES NOT START)

The Vehicle Protection warning light is on with the ignition on and off when the engine is started. If there is a breakdown, the warning light flashes.

		TEST RESULTS
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment to the engine management control unit and check for the presence of any errors	Move on to Step 2	Errors detected	Continue following the instructions given by the diagnostic equipment
2	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment to the Body Computer Node and check for the presence of any errors	Move on to Step 3	Errors detected	Continue following the instructions given by the diagnostic equipment
3	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment and check the operation of the Vehicle Protection warning light in active diagnosis at the Instrument Panel Node	End of diagnosis	Code warning light not flashing	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R