323000809 - K054 VEHICLE PROTECTION WARNING LIGHT OFF (ENGINE DOES NOT START)

With the key in the MAR position and the engine off, the warning light must be on; it should go off when the engine is running.

1	ERROR CHECK	All OK	Problems encountered	Operation
	Check for the presence of one or more of the following errors using the Examiner in Instrument Panel Node mode:- CAN line;- EEPROM memory.	Move on to Step 2	1. Detected "no additional information" and/or "BUS off".2. Fault in EEPROM memory.	1. Continue as instructed by the diagnostic equipment.2. Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R
2	ACTIVE DIAGNOSIS CHECK	All OK	Problems encountered	Operation
	Use the Examiner to check that in the instrument panel control unit, the Autotest function activates correctly in Active Diagnosis mode.	Move on to Step 3	The function in question is not controlled by Active Diagnosis.	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R
3	CHECK USING THE EXAMINER	All OK	Problems encountered	Operation
	With the diagnostic equipment connected, connect to the engine management control unit and check for the presence of errors.With the diagnostic equipment connected, connect to the Body computer control unit and check for the presence of errors.	End of diagnosis.	1. Presence of errors in the engine management control unit.2. Presence of errors in the Body Computer control unit.	1. Continue as instructed by the diagnostic equipment.2. Continue as instructed by the diagnostic equipment.