323000829 - K104 DISPLAY DOES NOT SHOW HEADLAMP ALIGNMENT DATA

When the buttons which control the headlamp alignment are operated (with the dipped headlamps on) the information on the display does not change.If the headlamp alignment adjustment is not working, see above.    See table I081 HEADLAMP ALIGNMENT ADJUSTER (ONE) RH OR LH NOT WORKING

1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check that all the display segments are working properly at the Instrument Panel in active diagnosis.	Move on to Step 2	One or more segments not working.	Replace the instrument panel    Op. 5560B10 CONTROL PANEL - R+R
2	HEADLAMP ALIGNMENT ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check:- connection between control panel and NQS;- connection to control panel earth;-    See E3080 HEADLAMP AGLINMENT CORRECTOR	End of diagnosis	1. Faulty wiring between control panel and panel.2. Earth defective.3. Control panel defective.	1. Restore correct wiring.2. Restore correct earth.3. Replace the control panel    Op. 7040A82 SWITCH UNIT ON LEFT SIDE OF DASHBOARD - R.R.