323000839 - K143 ONE WARNING LIGHT ACTIVATED BY STEERING COLUMN SWITCH UNIT NOT WORKING

When the lights are activated using the steering wheel interface, the associated warning light does not light up on the instrument panel

The following warning lights are activated when the steering wheel interface is operated:- Side lights/number plate lights- Main beam headlamps- Direction indicators

		TEST RESULTS
0	PRELIMINARY CHECKS	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	With the key to MAR, operate all the lights using the steering wheel interface, i.e.:- using the wheel, side lights/number plate lights- with the stalk, main beams (both fixed and flashing positions)- with the stalk, direction indicators (right and left) and check they are activated	Move on to Step 1	1. The side lights do not work2. The full beam headlamps do not work3. The direction indicators do not operate on both sides4. The direction indicators do not operate on one side	1.Continue as instructed    See table I001 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING 2.Continue as instructed    See table I006 MAIN BEAM HEADLAMPS NOT WORKING 3.Continue as instructed    See table I010 DIRECTION INDICATORS / HAZARD WARNING LIGHTS NOT WORKING 4.Continue as instructed in the
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment and check the operation of the warning lights in question on the INSTRUMENT PANEL NODE using active diagnosis	End of diagnosis	The warning lights do not flash	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R