323000841 - K145 ONE WARNING LIGHT ACTIVATED BY CONTROL PANEL NOT WORKING

When the lights are activated using the control panel, the associated warning light does not light up on the instrument panel

The warning lights activated from the panel are:- Fog lights;- Rear fog lights.

0	PRELIMINARY CHECKS	All OK	Problems encountered	Operation
	With the key OFF, operate the hazard lights and check they come on.With the key to MAR, turn all the functions in question on from the left control panel, i.e.:- fog lights;- rear fog lights. Check they come on.	Move on to Step 1	1. The foglamps are not working.2. The rear foglamps are not working.	1. Continue as indicated    See table I020 FOG LIGHTS NOT WORKING 2. Continue as indicated    See table I021 REAR FOG LAMPS NOT WORKING
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment and check the operation of the warning lights in question on the INSTRUMENT PANEL NODE using active diagnosis.	Move on to Step 2	The warning lights do not come on.	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R
2	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the fault is no longer present.	End of diagnosis.	The fault persists.	Replace Body Computer    Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.