323000856 - 5560 ON-BOARD INSTRUMENTS

GENERAL SPECIFICATIONS

The panel is installed behind the steering wheel.Its position guarantees maximum visibility/legibility of the information for the driver in all vehicle usage conditions (day/night) without reflections, distortions or double images.There are three different versions of panels, known as MODAL, COMFORT and MATRIX.The differences between the three versions are:

  • Display in the centre of the panel: on the Modal version there is a digital display, on the Comfort version the display is multifunctional, whilst on the Matrix version the display is reconfigurable multifunctional;
  • Presence and operation of warning lights;
  • Functions that can be set by the user.

INSTRUMENT PANEL

Indicators

The control panel is a node for the B-CAN and includes 4 gauges, which have stepping motors.Modal version
1 - Electronic speedometer2 - Fuel level (with insufficient fuel level warning light)3 - Engine coolant temperature (with overheating warning light)4 - Electronic rev counter5 - Digital displayComfort version
Comfort version with MTA Robotized Gearbox
1 - Electronic speedometer2 - Fuel level (with insufficient fuel level warning light)3 - Engine coolant temperature (with overheating warning light)4 - Electronic rev counter5 - Multifunction displayMatrix version
1 - Electronic speedometer2 - Fuel level (with insufficient fuel level warning light)3 - Engine coolant temperature (with overheating warning light)4 - Electronic rev counter5 - Reconfigurable multifunction display

Warning lights

The instrument panel also contains numerous LED negative contrast warning lights (there is also wiring for warning lights that can be activated by the CAN).

Buzzer

The instrument panel contains a buzzer with 8 different settings to carry out the following functions:- alarm/warning/danger signals- parking sensor signals (where fitted)- Seat Belt Reminder- direction indicators / hazard warning lights activation- button press roger beepThe acoustic signals can vary in intensity and frequency depending on the function signalled.The volume for the alarm signals can be adjusted down to zero (signal excluded) except for the seat belt reminder and direction indicator/hazard warning light signals which are fixed and the parking sensor which has a minimum volume that is not zero.

Keys

The instrument is connected with 5 external keys on the left side of the dashboard for the management of the headlamp alignment corrector (buttons CAF+, CAF-), the dimming and the setup menu ("MENU ESC", "+", "-" buttons).
1 - MENU ESC button:2,3 - + and - buttons:4,5 - CAF+ and CAF- buttons:MENU ESC button:- pressing it briefly allows the activation of the set up (illustrated below) and confirms it and memorizes the settings- pressing it for longer produces the return to the standard screen+ and - buttons: - allow the selection, setting and adjustment of the functions in the set up menu- allows the adjustment of dimming when not in the set up menuCAF+ and CAF- buttons:- adjust the setting of the headlamp alignment correctorThe TRIP function is managed by the special button in the steering wheel interface

Display

The control panel display is available in three versions depending on the vehicle''s on-board features:- COMFORT type display- MODAL type display- MATRIX type displayDisplays at the Key OFFThe display is not lit up and the clock is shown at the Key OFF with the front doors closed.The display comes on for 10 seconds and shows the clock and the total milometer at the Key OFF when at least one front door is opened/closed.Comfort type displayExample: standard page at Key ON with dipped headlamps on.
Version with Robotized Gearbox
It is a positive transreflective three-line alphanumerical FSTN type display.The top line, with 14 dot matrix characters (7x5) is for displaying:- Date- Trip computer data (processed by the control panel)- Set-up menu with messages for settings/adjustments- Messages about: activation of functions/service/faults/information/feedback- Repetition of audio function readings- Hands free system functionsThe bottom two lines in segments are for displaying:- Milometer- Clock- Outside temperature (for certain versions only)- Headlamp alignment corrector reading- Service symbol (spanner)- Robotized gearbox gear selection indicator and AUTO and ECO operating mode (where present)Modal type displayExample: standard page at Key ON with dipped headlamps on.
It is a (positive transreflective) two-line alphanumerical TN type display.The top line is for displaying:- Milometer and trip meter- Icons for Trip Computer dataThe bottom line is for displaying:- Clock- Headlamp alignment corrector readingMatrix type displayExample: standard page at Key ON with dipped headlamps on.
Example: standard page at Key ON with Blue&Me option.
This is an orange positive monochromatic reconfigurable matrix display with a two colour zone (red/amber) dedicated to the display of symbols summarizing the displays (zone G).The visible area of the reconfigurable matrix display is subdivided into thematic zones as illustrated below:
A: timeB: identification symbol for function displayedC: function title displayedD: outside temperatureE: headlamp alignment correctorF: area for displaying messages / information / settingsG: area for display summary symbolH: mileometerThe Audio Repetition, Convergence, Trip, Menu, Dimming, Feedback messages and other signals are displayed in zone F.The headings and symbols are displayed in the status bar (zone B + C).The Fault (high/low priority), Feedback, Information and standard screen are displayed in zone B + C + F

Warning lights

1 - Maximum engine coolant temperature (red)2 - Fuel reserve (amber)3 - Alternator failure (red)4 - Minimum engine oil pressure (red)5 - EOBD and engine management system failure (amber)6 - Heater plugs (JTD) (amber)7 - Water in diesel filter sensor (JTD) (amber)8 - Vehicle protection system failure (amber)9 - General failure (amber)10 - Handbrake applied / insufficient brake fluid level / EBD system failure (red)11 - ABS failure (amber)12 - ESP system intervention / failure (amber)13 - Brake pad wear (amber/red)14 - AIR BAG failure (red)15 - Seat belts not fastened (red)16 - Passenger AIR BAG deactivation (amber)17 - Doors open warning light (red)18 - Cruise control on (green)19 - Exterior lighting failure (amber)20 - Rear fog lamps (amber)21 - Side lights (green)22 - Fog lights (green)23 - Full beam headlamps (blue)24 - Left direction indicator (green)25 - Right direction indicator (green)26 - Robotized Gearbox failure (JTD) (red)27 - Service warning - Modal only - (amber)
The General Failure warning light summarizes the following signals:- Inertia switch intervention- Speed limit exceeded- Water in diesel filter sensor failure (JTD)- Engine oil pressure sensor failure- Rain sensor failureOn the Comfort and Matrix panes the warning light also summarizes other signals which have a dedicated associated message.
On versions with a Matrix panel, some of the signals listed above are shown in the dedicated area of the reconfigurable multifunction display (zone G) and not through a warning light. Specifically:- Alternator failure- Brake pad wear- Doors open warning

Connector pin out

The instrument panel (18-way) connector is illustrated here.
PINFUNCTION
1Earth
2+30 from F-53
3+15 (+ignition) from F-37
4Not connected
5B-CAN A
6B-CAN B
7Reference signal for headlamp alignment actuators
8+ dipped headlamps signal from F-13 for headlamp alignment corrector
9Negative signal from Trip Computer button on steering column switch unit
10Not connected
11Not connected
12Not connected
13Signal from controls in panel: “MENU ESC” / “+”
14Signal from controls in panel: "headlamp alignment corrector up", "headlamp alignment corrector down"
15Not connected
16Signal from controls in panel: “–“
17Not connected
18I.E./EOBD failure warning light negative signal from NCM

Indicators

SpeedometerThe instrument panel increases the actual speed value slightly (6% + 1 km/h but this increase also depends on the tyres fitted on the vehicle) for safety reasons, and never exceeds the maximum tolerance recommended in the directives of the countries where the vehicle is sold.The increase is calculated according to the panel.At the Key ON the indicator is at 0 (zero) km/h (or mph) and the instrument panel then displays the vehicle speed information.Rev counterAt the Key ON the indicator is at 0 (zero) RPM and the instrument panel then displays the engine rpm information.There is also a logic to prevent fluctuations of the rev counter with the engine idling.Fuel level gauge2 seconds after the Key ON the indicator shows the fuel level information.The reading at the start of the "fuel reserve" is red and the warning light is produced by the amber LED in the indicator graphics. The calibration of the gauge ensures maximum precision at the start of the red sector.Engine coolant temperature gauge2 seconds after the Key ON the indicator shows the engine coolant temperature information.The reading at the start of the "danger zone" is red and the warning light is produced by the red LED in the indicator graphics. The calibration of the gauge ensures maximum precision at the start of the red sector.Behaviour of the indicator:- If the temperature is below 50°C the indicator is at the first reference on the scale.- For temperatures of between 50 and 80°C the indicator moves in a linear fashion.- For temperatures between 80 - 115°C (normal operation), the pointer should remain in a stable position in the centre of the scale.- For temperatures between 115 and 124°C (and rising) and between 120 and 115°C (and decreasing) the pointer should move in a linear fashion.- For temperatures of 124°C (and rising) the pointer remains at the start of the red danger zone on the scale.- For temperatures above 124°C the coolant overheating warning light lights up and, at the same time, the pointer is positioned at the end of the scale.

Main functions

The main features are summarized in the table below.
CONTENTMODAL PANELCOMFORT PANELMATRIX PANEL
SpeedometerXXX
Rev counterXXX
Fuel level gaugeXXX
Engine coolant temperature gaugeXXX
Headlamp alignment correctorXXX
MilometerXXX
Outside temperature and ice danger-XX
Dimming-XX
Lighting not dimmedX--
Reduced set up menuX--
Complete set up menu-XX
TimeX--
Time and Da
... DATA ERROR - CROPPED TEXT | Ошибка данных - Текст обрезан ...