323000894 - 2710A20 WHEEL SIDE CONSTANT VELOCITY JOINT (ONE), L/H OR R/H - R + R WITH DRIVESHAFT REMOVED - INCLUDES BOOT REPLACEMENT
Removing
(
Refitting
)
- Position the driveshaft in a vice fitted with protective jaws.1. Remove the gaiter retaining bands and retract it.2. Remove the circlip (2a) and release the constant velocity joint (2b).3. Remove the protective gaiter.
Refitting
(
Removing
)
- Wash the constant velocity joint components thoroughly and visually check that there are no signs of seizing or grooves on the balls or seats.- Position the new protective gaiter on the driveshaft.- Place the constant velocity joint back in its housing and secure it using the retaining ring.- Place the protective gaiter in position, then fill it with the recommended grease.| Component | Type | Description | Classification | Qty. | Validity |
|---|---|---|---|---|---|
| Wheel side constant velocity joint | Grease (g) | TUTELA ALL STARContractual Technical Reference N° F702.G07 | NLGI 1- 2 | 85 | 1.4 8v |
| Component | Type | Description | Classification | Qty. | Validity |
|---|---|---|---|---|---|
| Wheel side constant velocity joint | Grease (g) | TUTELA ALL STARContractual Technical Reference N° F702.G07 | NLGI 1- 2 | 120 ± 10 | 1.3 Multijet |
| Component | Type | Description | Classification | Qty. | Validity |
|---|---|---|---|---|---|
| Wheel side constant velocity joint | Grease (g) | TUTELA ALL STARContractual Technical Reference N° F702.G07 | NLGI 1-2 | 120 ± 10 | 1.4 16v TJET |