323000900 - 2710A52 DIFFERENTIAL SIDE SLIDING JOINT (ONE) L/H OR R/H - R + R WITH DRIVESHAFT REMOVED - INCLUDES BOOT REPLACEMENT

Removing ( Refitting )

The procedure for the left sliding joint is described below; the operation for the right one are similar and the specific preliminary procedures should be carried out

    Op. 2110D74 LEFT DIFFERENTIAL INTERNAL DRIVESHAFT - R + R    Op. 2110D76 RIGHT DIFFERENTIAL INTERNAL DRIVESHAFT - R.R.1. Remove retaining ring (1a) and release three-lobe sliding joint (1b) from the driveshaft.2. Loosen the band (2a) and remove the protective boot (2b). Refitting ( Removing ) - Place the protective boot in its housing and secure it using the band.- Place the three-lobe sliding joint in the housing on the driveshaft and fasten it using the retaining ring.- Fill the protective gaiter with the recommended grease.

Component	Type	Description	Classification	Qty.	Validity
Differential side sliding joint, internal gaiter	Grease (g)	TUTELA STAR 700Contractual Technical Reference N° F701.G07	NLGI 0-1	70 ± 8	1.3 Multijet

Component	Type	Description	Classification	Qty.	Validity
Differential side sliding joint, internal tulip element	Grease (g)	TUTELA STAR 700Contractual Technical Reference N° F702.G07	NLGI 0-1	70 ± 8	1.3 Multijet

Component	Type	Description	Classification	Qty.	Validity
Differential side sliding joint, internal gaiter	Grease (g)	TUTELA STAR 700Contractual Technical Reference N° F702.G07	NLGI 0-1	75 ± 8	1.4 16v T-JET

Component	Type	Description	Classification	Qty.	Validity
Differential side sliding joint, internal tulip element	Grease (g)	TUTELA STAR 700Contractual Technical Reference N° F702.G07	NLGI 0-1	75 ± 8	1.4 16v T-JET