I001 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING - Fiat - LINEA - eLearn

When the side light switch is operated, the side light/number plate lights do not work;

The activation signal for the side lights and the no. plate lights is supplied directly by the Body Computer Node.

1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
		Test results
	Connect the Examiner diagnostic equipment to the diagnostic socket on the Body Computer Node and and check for errors.	Move on to Step 2	Presence of errors.	Continue following the instructions for the diagnostic equipment.
2	ELECTRICAL SYSTEM CHECK	All OK	Problems encountered	Operation
	- Check the continuity and the insulation of the wiring between the Exterior Lights Control and the Body Computer Node See E2010 SIDE LIGHTS / NO. PLATE LIGHTS - Check the stalk connection to earth.	Move on to Step 3	1. Wiring between stalk and Body Computer interrupted.2. Lighting stalk earth reference interrupted.	1. Restore the electrical connection See E2010 SIDE LIGHTS / NO. PLATE LIGHTS 2. Restore the electrical connection See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
3	EXTERIOR LIGHTS CONTROL CHECK	All OK	Problems encountered	Operation
	Check the control on the stalk is intact See E2010 SIDE LIGHTS / NO. PLATE LIGHTS Also check the operation of the body computer.	End of diagnosis.	1. Stalk switch not working.2. Body Computer defective.	1. Replace the steering column switch unit Op. 5550A10 STALK UNIT ASSEMBLY - R+R 2. Replace body computer Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.