323000930 - I008 SIDE LIGHTS NOT WORKING

		Test results
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the EXAMINER diganostic equipment and check for the following errors at the Body Computer Node:- error B1021;- error B1022;- error B1023	Move on to Step 2	1. Presence of error B10212. Presence of error B10223. Presence of error B1023	1. Restore the correct connections or replace the bulb    Op. 5540B22 BULB (ONE) FOR HEADLAMP/LIGHT CLUSTER LEFT OR RIGHT - R.R. 2. Restore the correct connections or replace the bulb    Op. 5540B22 BULB (ONE) FOR HEADLAMP/LIGHT CLUSTER LEFT OR RIGHT - R.R. 3. Restore the correct connections or replace the bulb    Op. 5540B22 BULB (ONE) FOR HEADLAMP/LIGHT CLUSTER LEFT OR RIGHT - R.R.
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Keeping the diagnostic equipment connected, check in active diagnosis that the side lights are working properly	Move on to Step 3	Side light not working properly	Replace the bulb    Op. 5540B22 BULB (ONE) FOR HEADLAMP/LIGHT CLUSTER LEFT OR RIGHT - R.R.
3	BODY COMPUTER CONNECTION CHECK	All OK	Problems encountered	Operation
	Check for deformed terminals or connections not present on the Body Computer	Move on to Step 4	Missing connections/pins bent	Renew the correct connections
4	STEERING COLUMN SWITCH UNIT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the lights stalk contacts are working properly	Move on to Step 5	Stalk contacts defective	Replace the steering column switch unit    Op. 5550A10 STALK UNIT ASSEMBLY - R+R
5	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace Body Computer    Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.