323000959 - I090 FOLLOW ME HOME FUNCTION IS NOT ACTIVATED

The "Follow me home" function is not activated; the main beam headlamps and the dipped headlamps work normally;

The Follow me home function should be activated by the user within two minutes of the Key Off using the stalk in flasher mode.If the user keeps the flasher lever in the flasher position for more than two seconds the "Follow me home" function will be deactivated.The lights which come through the "Follow me home" function are the dipped headlamps;

		Test results
1	STEERING COLUMN SWITCH UNIT CHECK	All OK	Problems encountered	Operation
	Check the operation of the steering column switch unit in the headlamp flasher position    See E2012 MAIN BEAM HEADLAMPS	Move on to Step 2	Steering column switch unit faulty	Replace the steering column switch unit    Op. 5550A10 STALK UNIT ASSEMBLY - R+R
2	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace body computer    Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.