1088E10 RADIATOR COOLING FAN - R + R - Fiat - LINEA - eLearn

323001231 - 1088E10 RADIATOR COOLING FAN - R + R

) - Undo the bolts on the system supply tank, open the retaining clips and disconnect the pipe from the tank to the radiator, place the tank and pipe aside.1. Remove the waste gate solenoid from the fan mounting and move it to one side.

1. Disconnect the resistor electrical connection.

	Description	Connector
1	Engine fan adjustment heater coil - 1	See O010 ENGINE FAN ADJUSTMENT RESISTANCE - 1

2. Detach the electrical connection for the fan.

	Description	Connector
2	Fan motor	See N011 FAN MOTOR

1. Remove o-rings (1a) securing fan (1b) and remove it from the clips on the right side of the radiator.

Refitting ( Removing

) - Place the fan back in its housing and fasten it to the radiator using the clips and o-rings.- Secure the fan electrical connection.

	Description	Connector
-	ENGINE FAN MOTOR -1	See N011 FAN MOTOR

- Connect the resistor electrical connection.

	Description	Connector
-	ENGINE FAN ADJUSTMENT HEATING COIL - 1	See O010 ENGINE FAN ADJUSTMENT RESISTANCE - 1

- Place the waste gate solenoid in position.- Refit the engine cooling system supply pipe and the tank in their housing, close the pipe retaining clips and screw in the bolts on the system supply tank.