323001396 - X001 EXCESSIVE FUEL CONSUMPTION

The engine operates in a way that appears normal, but the fuel consumption is higher than that recorded in the past. The consumption data recorded in the vehicle technical documentation is defined during the course of approval tests in accordance with directive 1999/100/CE.These tests simulate an urban cycle and an average non-urban cycle and therefore may not be representative as fuel consumption depends a great deal on driving styles

		TEST RESULTS
0	PRELIMINARY CHECKS	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following:condition of the air filter;Check the exhaust circuit, paying particular attention to any obstructions in the pipes.	Move on to Step 1.	1. Filter element dirty or damaged.2. Outlets obstructed.4. Exhaust system obstructed.	1. Replace the filter element.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R. 2. Replace the exhaust pipe assembly.3. Replace the defective system component.
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the Examiner diagnostic equipment to the diagnostic connector and check the following at the engine management control unit:- in error mode;- that there are no faults;- in parameters mode;- the plausibility of all the parameters.	Move on to Step 2.	Error detected in the engine management control unit.	Continue following the instructions given by the diagnostic equipment.
2	SUPPLY PRESSURE CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the fuel supply circuit by checking the fuel supply pressure.    Op. 0510C10 FUEL SYSTEM - CHECK DELIVERY PRESSURE	Move on to Step 3.	1. Pressure not correct: common rail faulty2. Pressure not correct:- injectors faulty.	1. Replace the common rail.    Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R. 2. Replace the injectors.    Op. 1056B70 INJECTOR (ONE) - R + R WITH FUEL MANIFOLD PIPE REMOVED - INCLUDES SEAL REPLACEMNT