323001434 - 3340B62 RIGID PIPE (ONE), LEFT OR RIGHT, FROM HYDRAULIC CONTROL UNIT WITH PIPE CONNECTOR TO REAR BRAKES - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Undo the connector for the rigid pipe from the ABS control unit.- Undo the rigid pipe fastening clips. 1. Open clips (1a), undo connector (1b) and remove rigid pipe (1c). Refitting ( Removing ) - Refit the rigid pipe, do up the clips and connect to the hose, tightening the connector to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

- Tighten the connector, fastening the rigid pipe to the ABS control unit to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rigid pipes from hydraulic control unit to right front/rear brakes - control unit side	Connector	M12	1.4 ÷ 1.8

    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R - Remove the vehicle from the lift.