323001456 - 0520G46 FUEL SYSTEM - CHECK SUPPLY PRESSURE USING THE EXAMINER

- Open the fuse box casing lid in the engine compartment and remove fuse F30 (15A) from the fuel supply pump.- Start-up several times until all the pressure in the fuel distribution manifold has discharged.    Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Disconnect the rapid connector for the fuel supply pipe to the tank and connect it to the connector pipe.
ToolDescriptionFunctionValidity
1870885001Connector pipeFuel supply pressure check1.4 16v TJET
2. Connect the connector pipe to the fuel manifold, tank return side.
ToolDescriptionFunctionValidity
2000024501Connector pipeFuel supply pressure check1.4 16v TJET
3. Connect kit EX07 to the connector pipe fitted earlier.
ToolDescriptionFunctionValidity
1806338000Transducer Examiner test kit 2Cylinder compression checkFuel supply pressure checkEngine lubrication system pressure test1.4 16v TJET
4. Connect the EX06 5 bar pressure transducer.
ToolDescriptionFunctionValidity
1806338000Transducer Examiner test kit 2Cylinder compression checkFuel supply pressure checkEngine lubrication system pressure test1.4 16v TJET
5. Connect the Examiner EX01 cable.
ToolDescriptionFunctionValidity
1806338000Transducer Examiner test kit 2Cylinder compression checkFuel supply pressure checkEngine lubrication system pressure test1.4 16v TJET
- Refit fuel supply pump fuse F30 (15A) in its housing.- Turn ignition key to MAR and check that fuel pressure reaches approximately 3 bar within 10 seconds.- Start the engine, let it run and check that the pressure is above 3.5 bar.