323001498 - 7010M26 ELECTRIC WINDOW OPENING MECHANISM FOR ONE REAR DOOR LH OR RH - R.R

Removing ( Refitting )     Op. 7010M10 REAR SIDE DOOR ELECTRICALLY OPERATED WINDOW SWITCH (ONE), LEFT OR RIGHT - R.R     Op. 7010E10 REAR SIDE DOOR INNER PANEL - R.R. OR REPLACE     Op. 5570T96 REAR SIDE SPEAKER (ONE), LEFT OR RIGHT- R.R     Op. 7010A05 REAR SIDE DOOR WATER GUARD PROTECTION - R.R OR ARRANGE 1. Provisionally connect the window switch unit to the connection (1a), then move the window (1b) until the glass retainer (1c) is in an accessible position (as in the figure).2. Release the retainer (1c) from the window drive pin (2a).3. Disconnect the opening (3a) for the window from the pin (2a). 1. Raise the window (1a) until it is in the end of travel position, then secure it using a retainer (1b).2. Detach the electrical connection.

	Description	Connector
2	LEFT REAR ELECTRIC WINDOW MOTOR	See N065 LEFT REAR ELECTRIC WINDOW MOTOR
2	RIGHT REAR ELECTRIC WINDOW MOTOR	See N066 RIGHT REAR ELECTRIC WINDOW MOTOR

3. Loosen the nuts fixing the window opening mechanism. 1. Extract the window opening mechanism. Refitting ( Removing ) - Check that the window opening mechanism is not damaged.1. Position the window opening mechanism and screw in the nuts (1a); do not tighten the nuts (1a) (for the subsequent adjustment). - Attach the electrical connection.- Remove the retainer and lower the window, then insert the opening in the drive pin.- Insert the retainer in the drive pin.    Op. 7010A05 REAR SIDE DOOR WATER GUARD PROTECTION - R.R OR ARRANGE     Op. 5570T96 REAR SIDE SPEAKER (ONE), LEFT OR RIGHT- R.R     Op. 7010E10 REAR SIDE DOOR INNER PANEL - R.R. OR REPLACE     Op. 7010M10 REAR SIDE DOOR ELECTRICALLY OPERATED WINDOW SWITCH (ONE), LEFT OR RIGHT - R.R