3. Undo the bolt and remove the earth lead.4. Undo the cable loom duct retaining bolt and move it to one side.5. Undo the bolts (5a) and remove the ignition coils (5b).
Refitting
(
Removing
)
- Place the ignition coils in their housings and tighten the bolts to the recommended torque.
Component
Fastening
dia
Value (daNm)
Validity
Ignition coils
Bolt
M6
0.8 ÷ 1.0
1.4 8v1.4 16v TJET
- Place the cable loom duct in position and tighten the bolt.- Connect the earth lead and tighten the bolt.- Connect the electrical connections for the ignition coils.- Secure the electrical connection for the timing sensor. Op. 1016A10 SOUND-PROOFING COVER - R.R
Removing
(
Refitting
)
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Detach the timing sensor electrical connection.