| | Test results |
| 1 | CONTROL CABLES TRAVEL CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the control cable return travel is free from impediments | Move on to Step 2 | Control cables do not slide freely | Restore correct operation. If damaged, replace the cables involved Op. 3380A30 HANDBRAKE CABLE - R+R |
| 2 | OPERATING LEVER BUTTON CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the operating lever release button returns freely | Move on to Step 3 | Adjustment incorrect | Remove and release the button; if necessary, replace the operating lever Op. 3380A10 HANDBRAKE LEVER - R+R |
| 3 | CABLE FASTENING TO REAR BRAKE CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the cable is correctly fastened to the rear brake calliper | Move on to Step 4 | Cable not correctly fastened | Fasten the cable correctly to the brake calliper |
| 4 | CLEARANCE TAKE-UP DEVICE CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the handbrake clearance take-up device is working efficiently | Move on to Step 5 | Rear brake calliper faulty | Replace the rear brake calliper involved Op. 3310B36 REAR BRAKE CALIPER (ONE), LEFT OR RIGHT - R.R |
| 5 | CORRECT OPERATION CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the problem starting from another symptom |
