323001811 - N049 THE BLUETOOTH CANNOT BE ENABLED

A telephone with a Bluetooth® system cannot be recognized by the vehicle system even if other telephones have been recognized previously.This table does not consider faults due to the service provider or phone malfunctionsN.B.: The following telephones are enabled to operate with the Bluetooth system and are supported by the system on the vehicle: Audiovox®: SMT 5600 (Orange™ C500)*· Motorola®: Mpx220**, V3 Razr*, V525*, V600*, V635· Nokia®: 3230, 6230, 6230i, 6600†, 6620, 6820, 7610, 9500 Communicator*· Sony Ericsson®: k700i, k750i, P910a, S710a, T610**, T630**, T637**, Z600*** The system is not currently capable of supporting the GPRS (General Packet Radio Services) connection when it is connected to this mobile phone. ** The system is not currently capable of supporting the hands-free function when connected to this mobile phone. † The system is not currently capable of supporting call waiting when connected to this mobile phone.
1BLUETOOTH OPERATION CHECK®All OKProblems encounteredOperation
Check whether the telephone is cable of connecting via Bluetooth® to other systems such as other mobile phones, earphone systems or computers.Move on to Step 2The telephone is not capable of dialogue even with other Bluetooth® systems.The problem is inherent to the phone: the customer must contact a mobile phone service centre.
2REGISTERED TELEPHONES CHECKAll OKProblems encounteredOperation
Check, in the User Data menu, that not more than four telephones are registered and that the telephone in question is one of these.Move on to Step 41. Not more than four telephones are registered but the telephone in question is not one of these.2. Five telephones are registered and the telephone in question is not included.1. Register the telephone.2. Move on to Step 3
3DELETING REGISTERED TELEPHONESAll OKProblems encounteredOperation
Following the instructions in the Owner''s Handbook, delete all the telephones registered in the system, then start the registration process again, checking that the outcome is positive.End of diagnosis.The fault persists.Move on to Step 5
4TELEPHONE REGISTRATIONAll OKProblems encounteredOperation
Following the instructions in the Owner''s Handbook, register the telephone in question, checking that it is successful.
During the registration procedure, an enablement code, shown in the instrument panel, will need to be entered in the telephone.
End of diagnosis.The fault persists.Move on to Step 5
5BLUETOOTH® CHECKAll OKProblems encounteredOperation
Carry out the Bluetooth network disconnection active diagnosis on the Bluetooth® system and check whether the fault disappears.End of diagnosis.The fault persists.If there is a Bluetooth® system update CD, carry out the    See Test 5570TP BLUETOOTH® SOFTWARE LANGUAGE UPDATE PROCEDUREotherwise replace the Bluetooth® control unit    Op. 5570T49 BLUETOOTH ELECTRONIC CONTROL UNIT - R.R.