7210E66 R.R. REAR BUMPER - Fiat - LINEA - eLearn

323001860 - 7210E66 R.R. REAR BUMPER

) Op. 7040B06 SIDE TRIM (ONE) LEFT OR RIGHT, LOAD COMPARTMENT/LOAD PLATFORM - R.R. Op. 7055B48 REAR WHEEL ARCH LINER (ONE), LEFT OR RIGHT - R.R. - Raise the vehicle on the lift.1. Undo the six bolts in the lower part of the bumper.- Undo the two bolts securing the bumper to the frame, through the wheel housings on the left and right-hand side of the vehicle.- Lower the vehicle.

1. Undo the bolts in the luggage compartment, on the right and left-hand side.

2. Undo the bolts in the upper part of the bumper.

1. Disconnect the electrical connection for the number plate light.

	Description	Connector
1	LEFT NO. PLATE LIGHT	See F050 LEFT NUMBER PLATE LIGHT
1	RIGHT NO. PLATE LIGHT	See F051 RIGHT NUMBER PLATE LIGHT

1. Disconnect the electrical connection for the parking sensors.

	Description	Connector
1	PARKING SENSOR UNIT	See K097 PARKING SENSORS

- Remove the bumper from the vehicle.

Refitting ( Removing

) - Check that the rear bumper is not damaged.1. Refit bumper (1a), inserting ridges (1b) into housings (1c) on the vehicle and check the alignment.

- Tighten the upper bolts.- Connect the electrical connections.- Raise the vehicle.- Tighten the lower bolts that secure the bumper to the body.- Lower the vehicle.- Working from the luggage compartment, tighten the bolts for the upper edges of the bumper.

Component	Fastening	dia	Value (daNm)	Validity
Rear bumper (front fastening)	Bolt	M6	0.6 ÷ 0.8

- Tighten the two bolts securing the bumper to the frame, through the wheel housings on the left and right-hand side. Op. 7055B48 REAR WHEEL ARCH LINER (ONE), LEFT OR RIGHT - R.R. Op. 7040B06 SIDE TRIM (ONE) LEFT OR RIGHT, LOAD COMPARTMENT/LOAD PLATFORM - R.R.