Position the vehicle on a two column lift.Raise the vehicle and check that the anti-roll bar is correctly positioned (transversely) in relation to the centre line.Check that the paint is not worn at the contact points between the bar and the wishbones.Using a torque wrench calibrated to the recommended value, check that the fastenings securing the anti-roll bar to crossmember (1) are tightened to the recommended torque.
Type of fastening
Component
Torque (daNm)
1
Bolt M8
Crossmember
2,5
Using a torque wrench calibrated to the recommended value, check that the fastenings securing the connecting rod to the bar (2a) and to the shock absorber (2b) are tightened to the recommended torque.
