323002012 - 7035OA CHECK FOR ABSENCE OF FIXED WINDOW INFILTRATIONS (WINDSCREEN AND REAR SCREEN)

Apply a solution of soapy water to the entire perimeter of the glass.From inside the passenger compartment, blow through with compressed air along the entire perimeter, moving the covers to the side and the top, if necessary.Visually inspect for any bubbles of air on the outer surface: this makes it possible to locate any areas where the sealant is insufficient or damaged.If there is a lack of sealant on the vertical pillars, the pillar cover can be moved and rubber sealant can be injected from the inside.If there is a lack of sealant on the top section, the roof lining can be moved and rubber sealant can be injected from the inside.If there is a lack of sealant on the bottom section, the cover at the base of the (front) windscreen or the rear parcel shelf (for the rearscreen) can be moved and rubber sealant can be injected from the inside.If there is insufficient sealant in widespread areas, the overall seal of the window cannot be guaranteed and therefore it has to be removed and the windscreen or the rearscreen must be completely resealed.    Op. 7035A18 WINDSCREEN GLASS - R.R INCLUDING CLEANING HOUSING     Op. 7035B14 REAR WINDOW GLASS - R.R INCLUDES CLEANING HOUSING