323002123 - 1088C14 WATER PUMP - R + R WITH TIMING BELT(S) REMOVED
Removing
(
Refitting
)
Op. 0010T20 ENGINE COOLANT - CHANGE 1. Undo the bolts fixing the water pump to the crankcase.2. Remove the water pump from the crankcase.
Refitting
(
Removing
)
- Clean the residues of sealant from the mating surfaces between the engine block and the water pump.- Apply a strip of silicone sealant to the contact surfaces between the water pump and the engine block.- Position the water pump in its housing and secure it tightening the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Water pump | Bolt | M6 | 0.9 ÷ 1.1 | 1.4 16v TJET |