323002143 - 4420A48 REAR SUSPENSION COIL SPRINGS - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 4450B13 REAR WHEELS (TWO) - R.R 1. Place a hydraulic lift under the rear crossmember by the spring.2. Undo the bolt securing the shock absorber to the suspension crossmember.3. Slowly lower the hydraulic lift until the pressure is fully released from the spring and remove it.

Do the same for the right spring.

Refitting ( Removing ) - Place a hydraulic lift under the rear crossmember at the position of the spring seat.- Place the spring in its housing.- Raise the hydraulic lift slowly until the shock absorber lower mounting is in line with its housing in the crossmember and then secure it tightening the bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rear shock absorber - crossmember side	Bolt	M12	11.9 ÷ 13.2

- Slowly lower the hydraulic lift until the pressure is fully released from the spring.

Do the same for the right spring.

- Remove the hydraulic lift.    Op. 4450B13 REAR WHEELS (TWO) - R.R - Remove the vehicle from the lift.    Op. 4450A40 REAR WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT, INCLUDES ADJUSTMENT IF NECESSARY