323002589 - 5540B22 BULB (ONE) FOR HEADLAMP/LIGHT CLUSTER LEFT OR RIGHT - R.R.

Removing ( Refitting ) - Proceed as follows for the left dipped headlamp side light.- Open the bonnet1. Undo and remove the protective cover.
1. Disconnect the electrical connection for the dipped headlamp bulb (1a) or the side light bulb (1b) as necessary.- Release the metal protection for the bulb.- Extract the bulb.
- Proceed as follows for the left main beam headlamp bulb.1. Undo and remove the protective cover.- Disconnect the electrical connection for the main beam headlamp bulb.- Release the metal protection for the bulb.
1. Extract the bulb.
If the bulb is working properly, avoid touching it with your hands. If this does happen, clean the bulb with alcohol.
- Proceed as follows for the right dipped headlamp side light.- Open the bonnet1. Undo and remove the protective cover.
1. Disconnect the electrical connection for the dipped headlamp bulb (1a) or the side light bulb (1b) as necessary.- Release the metal protection for the bulb.- Extract the bulb.
- Proceed as follows for the right main beam headlamp bulb.1. Undo and remove the protective cover.- Disconnect the electrical connection for the main beam headlamp bulb.- Release the metal protection for the bulb.
1. Extract the bulb.
If the bulb is working properly, avoid touching it with your hands. If this does happen, clean the bulb with alcohol.
Refitting ( Removing ) - Check the condition of the bulb and make sure that it is clean.
Avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.
- Repositon the bulb correctly.- Attach the retaining spring.- Attach the electrical connection.- Position the rubber cover.- Check that the bulb is working.- Close the bonnet.