323002918 - 0520G15 COMPRESSION TEST - CHECK WITH EXAMINER WITH SPARK PLUGS/INJECTORS REMOVED

1. Fit the connector (EX15) in the spark plug housing.

Tool	Description	Function	Validity
1806338000	Transducer Examiner test kit 2	Cylinder compression checkFuel supply pressure checkEngine lubrication system pressure test	1.4 16v TJET

2. Connect the 50 bar transducer (EX05) for the following tool.

Tool	Description	Function	Validity
1806338000	Transducer Examiner test kit 2	Cylinder compression checkFuel supply pressure checkEngine lubrication system pressure test	1.4 16v TJET

3. Connect the cable (EX01) for the following tool to the 50 bar transducer and the Examiner SAM card.

Tool	Description	Function	Validity
1806337000	Transducer Examiner test kit 1	Cylinder compression checkFuel supply pressure check	1.4 16v TJET

Make sure that there are no leaks from the various test equipment connectors.

- Disconnect fuse F30 (15 A), located in the fuse box casing in the engine compartment.- Select "PETROL CYLINDER COMPRESSION" on the Examiner in the instrument ambient.- Fully depress the clutch pedal on versions with a manual gearbox or the brake pedal on versions with Selespeed transmission and turn the engine over using the starter motor until the compression value appears on the Examiner.

To measure the compression pressure, start the engine using a fully charged battery.

- Repeat the test for the remaining cylinders.- Check that there is not a great difference between the pressure readings for the cylinders.