323002928 - 3310B62 REAR BRAKE PADS - REPLACE

Removing ( Refitting )

The following procedure describes the removing-refitting of the left rear brake pads; proceed in the same way for the right rear brake pads.

- Position the vehicle on a lift.    Op. 7040L22 REAR COVER ON TUNNEL - R.R.1. Loosen the handbrake lever cable adjustment nut     Op. 4450B13 REAR WHEELS (TWO) - R.R 1. Disconnect the handbrake cable from the brake calliper.2. Undo the brake caliper lower fixing bolt.3. Turn the brake caliper over and secure it. 1. Remove the brake pads. Refitting ( Removing ) - Fit new brake pads.1. Using the special tool, retract the rear brake caliper cylinders.

Fit the pins on the tool inside the splining on the cylinders.

Tool	Description	Function	Validity
1856134000	Spanner	Retracting rear caliper cylinders	1.4 16v TJET

- Fit the brake caliper on the bracket and tighten the lower bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rear brake caliper brackets - stub axle side	Bolt	M10	5.4 ÷ 6.0	1.4 16v TJET

- Connect the handbrake cable to the brake caliper.    Op. 4450B13 REAR WHEELS (TWO) - R.R - Remove the vehicle from the lift.    Op. 3380A04 HANDBRAKE - ADJUST TRAVEL     Op. 7040L22 REAR COVER ON TUNNEL - R.R.