323000340 - 3310A30 FRONT BRAKE CALIPER (ONE) - R.R

Removing ( Refitting ) - Position the vehicle on a lift.- Disconnect the negative battery terminal.- Unscrew the brake fluid reservoir cap and fit the tool.

Tool	Description	Function	Validity
2000001400	Plug	Brake/ clutch system vacuum

    Op. 4450B02 LEFT FRONT WHEEL - R.R 1. Disconnect the connector (1a), remove the clip (1b) and disconnect the hose (1c). 1. Disconnect the electrical connection for the brake pad wear sensor.

	Description	Connector
1	Left brake pad wear sensor (switch)	See K020 LEFT BRAKE PAD WEAR SENSOR (SWITCH)

2. Undo connector (2a) and remove hose (2b) by releasing from fastening (2c).3. Undo the bolts (3a) and remove the brake caliper (3b). Refitting ( Removing ) - Fit the brake caliper from its seat and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front brake calipers - bracket side	Bolt	M8	2.7 ÷ 3.3

- Fit the rigid pipe and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Flexible pipe to front brakes - brake caliper side	Connector	M10	1.4 ÷ 1.8

- Connect the electrical connection for the brake pad wear sensor.- Conect the hose, secure with the clips and tighten the fitting to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

    Op. 4450B02 LEFT FRONT WHEEL - R.R - Connect the negative battery terminal (-).    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR - Remove the vehicle from the lift.