323001153 - 1080B95 REAR LAMBDA SENSOR TO CATALYTIC CONVERTER - R.R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. 1. Disconnect the electrical connection for the rear Lambda sensor to the catalytic converter.

	Description	Connector
1	Lambda sensor on catalytic converter	See K017 LAMBDA SENSOR ON CATALYZER

- Open the intermediate clip retaining the rear Lamba sensor wiring to the catalytic converter. 1. Unscrew and remove the rear Lambda sensor from the catalytic converter. Refitting ( Removing ) - Refit the rear Lambda sensor in its housing on the catalytic converter and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Lambda sensor	-	M18	4.1 ÷ 5.0	1.4 8v1.4 16v TJET1.3 Multijet

- Connect the electrical connection for the rear Lambda sensor to the catalytic converter.

	Description	Connector
-	LAMBDA SENSOR ON CATALYTIC CONVERTER	See K017 LAMBDA SENSOR ON CATALYZER

- Close the intermediate clip retaining the rear Lamba sensor wiring to the catalytic converter.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Remove the vehicle from the lift.