323001195 - 7050D20 REAR SEAT CUSHION TRIM - R.R.

Removing ( Refitting )     Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R. 1. Disconnect terminal hooks (1a) from perimeter cord (1b) tensioning the cover.2. Release cover (2a) from all frame perimeter retainers (2b).3. Separate cover and padding (3a) from cushion frame (3b). 1. Fold the cushion over and release the cover along the entire perimeter of the padding.2. Using clippers, cut all the upper retainers for the cushion cover.3. Separate cushion cover (3a) from padding (3b). Refitting ( Removing ) - Check that the cushion cover is not damaged.- Position the cushion cover on the upper part of the padding and attach the retainers using special pliers.

Mould the cover on the padding during the various refitting stages.

- Position the metal frame on the padding.- Fit the cover on the padding and on the frame, along the entire perimeter of the cushion.1. Fasten cover (1a) to frame perimeter retainers (1b).2. Attach cover (1a) to all other frame perimeter retainers (2a).3. Pull cover perimeter tensioning cord (3a) and connect terminal hooks (3b) to the frame housings.     Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R.