 | If the injection-ignition system control unit is replaced, the following self-learning procedures must be carried out:Throttle position self-learning- with the engine switched off, turn the ignition key to MAR without pressing the accelerator pedal and with the engine temperature between 5.25°C and 100.5°C for 29 seconds.Brake Node self-learning- turn the ignition key to MAR and wait for 5 seconds;- turn the key OFF and wait for the data to be recorded in the memory.Manual/robotized gearbox self-learning- turn the key to MAR and then press the clutch pedal if the vehicle is equipped with a manual gearbox;- wait a few seconds (2-3) if the vehicle is equipped with a robotized gearbox;- turn the key OFF and wait for the data to be recorded in the memory.If the vehicle is equipped with a climate control systemthe following self-learning procedure must also be carried out:- activate the climate control system using the special button and operate the knob to select the second fan speed for 15 seconds.If the vehicle is equipped with a Cruise Control systemthe following self-learning procedure must also be carried out:- activate the system for a few seconds by turning the switch on the control lever ON. |
Removing
(
Refitting
)
