323001489 - 5040A40 AIR CONDITIONING CONDENSER - R+R

Removing ( Refitting )
Follow the recommended safety instructions.    Op. 5040 AIR CONDITIONING CASING AND COMPONENTS
- Position the vehicle on a lift.    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE     Op. 7210E10 R.R. FRONT BUMPER 1. Undo the bolt (1a) and disconnect the pipes (1b) from the condenser.
Seal the connectors that have been disconnected using suitable plugs to prevent dampness and impurities from entering the system.
2. Undo the radiator retaining bolts (2a) and remove the condenser (2b).
- If necessary, remove the dehydrating filter as follows:1. Release the circlip using suitable pliers.2. Tighten an M5 bolt (2a) into opening (2b).3. Undo bolt (2a) and remove dehydrating filter (3a).
Refitting ( Removing ) - Check that the condenser is intact and does not show signs of damage or deposits of dirt on the finned surface.- If removed, refit the dehydrating filter and attach the retaining ring.- Place the condenser in position and tighten the radiator fixing bolts.- Connect the pipes to the condenser and tighten the fixing bolt.
Replace the O-rings on the connectors. Only use green coloured seals that are resistant to R134a coolant. Lubricate the connector threads using anti-freeze.
    Op. 7210E10 R.R. FRONT BUMPER     Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE - Remove the vehicle from the lift.