323002156 - 5520B10 STARTER MOTOR - R+R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 5530B10 BATTERY - R+R 1. Working from the left side of the engine, unscrew the upper starter motor bolt. - Raise the vehicle.1. Open the protective cover for the starter motor electrical connections.2. Unscrew the nuts.3. Disconnect electrical connections (3a, 3b) from the starter motor.

	Description	Connector
-	STARTER MOTOR	See A020 STARTER MOTOR

4. Unscrew the lower starter motor bolt.5. Remove the starter motor. Refitting ( Removing ) - Check that the starter motor is not damaged.1. Place the starter motor in position.2. Screw in the lower starter motor bolt and tighten to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Starter motor	Bolt	M8	2.25 ÷ 2.75

3. Connect the electrical connections for the starter motor, tighten the nuts and close the protective cover.

Component	Fastening	dia	Value (daNm)	Validity
Positive lead (+30) on starter motor	Nut	M8	0.7 ÷ 1.1

Component	Fastening	dia	Value (daNm)	Validity
Supply lead (+50) on starter motor	Nut	M6	0.4 ÷ 0.6

- Lower the vehicle.- Screw in the upper starter motor bolt.

Component	Fastening	dia	Value (daNm)	Validity
Starter motor	Bolt	M8	2.25 ÷ 2.75

    Op. 5530B10 BATTERY - R+R - Remove the vehicle from the lift.