323002494 - 1820B20 MASTER CYLINDER (PUMP) - R + R

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R - Connect a suitable container to the clutch control actuator bleed valve and drain all the brake-clutch fluid.- Disconnect the clutch system feed pipe from the brake-clutch fluid reservoir. 1. Lift up spring (1a) and disconnect vibration damper (1b) from clutch pump (1c).
1. Press the clutch pedal.2. Press the edges of retaining device (2a) with tool (2b) and then release the rod for clutch master cylinder (2c) complete with the retaining device from the pedal.
ToolDescriptionFunctionValidity
2000010500CalliperDisconnect the master cylinder from the clutch pedal
1. Undo bolts (1a) and remove clutch pump (1b).
Refitting ( Removing ) - Position the clutch pump in its housing and secure it by tightening the bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Clutch master cylinder (pump)Bolt-2.5
- Connect the master cylinder pushrod to the locking device.- Connect the clutch pedal to the locking device by means of the clips. - Connect the vibration damper to the clutch pump and secure it using the clip. - Connect the clutch system feed pipe to the brake-clutch fluid reservoir.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR