323002884 - 1064A31 HEAT SHIELD FOR TURBOCHARGER - R.R.
Removing
(
Refitting
)
Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Open the oil vapour pipe retaining clip.2. Undo the nut securing the turbocharger water supply pipe to the catalytic converter.3. Undo the turbocharger water supply pipe connector, turbocharger side.4. Undo fastenings (4a) and remove the oil vapour recovery pipe support bracket and the heat shield for turbocharger (4b).
Refitting
(
Removing
)
- Refit the turbocharger heat shield and the oil vapour recovery pipe support bracket in their housings and tighten the fastenings.- Tighten the connector complete with new gaskets for the turbocharger water supply pipe, turbocharger side to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Turbocharger water supply pipe | Connector | M16 | 3.0 ÷ 3.6 | 1.4 16v TJET |
 | The connector should be tightened, keeping the pipe still. Any movements of more than 3° affect the seal of the connector. |