323002920 - 1820B38 HYDRAULIC CLUTCH ACTUATOR WITH COAXIAL CONTROL - R.R WITH GEARBOX REMOVED
Removing
(
Refitting
)
1. Prise up the protection from the gearbox bell housing and remove it.2. Open tabs (2a), undo bolts (2b) and remove coaxial control hydraulic clutch actuator (2c).
1. Cut the sealant and remove the flange and main shaft oil seal.
Refitting
(
Removing
)
- Apply sealant to the new flange and oil seal and place it in position.- Place the coaxial control clutch hydraulic actuator in its housing and secure it using the bolts.- Fold over the flange retaining tabs.- Place the protection back in its housing.
Removing
(
Refitting
)
1. Prise up the protection from the gearbox bell housing and remove it.2. Open tabs (2a), undo bolts (2b) and remove coaxial control hydraulic clutch actuator (2c).
