323002921 - 1820B57 PIPE FROM VIBRATION DAMPER TO SLAVE CYLINDER

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R - Unscrew the brake fluid reservoir cap and fit the tool.
ToolDescriptionFunctionValidity
2000001400PlugBrake/ clutch system vacuum
1. Move back clip (1a) and disconnect damper (1b) from the master cylinder.2. Open the intermediate pipe retaining clips.
1. Adjust retaining clip (1a), disconnect pipe (1b) complete with damper and remove it.
- Operate the quick coupling to disconnect the damper from the pipe. Refitting ( Removing ) - Connect the pipe to the damper using the quick coupling.- Place the pipe assembly in position and connect the damper to the master cylinder using the retaining clip.- Connect the pipe, hose side, to the operating cylinder and compress the retaining clip.- Close the intermediate pipe retaining clips.     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR