75019 - 1056B50 Coolant temperature SENSOR - R.R.

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.     See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r 1. Disconnect the electrical connection from the engine coolant temperature sensor.2. Undo the engine coolant temperature sensor and remove it.
Refitting ( Removing ) - Place the engine coolant temperature sensor in its housing and tighten it to the recommended torque.
Value - daNmFasteningComponentØ  
.3-COOLANT TEMP SENSORM12
- Connect the electrical connection to the engine coolant temperature sensor.     See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.     See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead.