79439 - 5520B10 STARTER MOTOR - R&R

Removing ( Refitting ) - Position the vehicle on the lift.- Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).- Raise the vehicle on the lift.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.     See in Op. 1076B70 EXHAUST PIPE BETWEEN PRECATALYZER AND CATALYZER - R.R. 1. Disconnect the electrical connections from the starter motor.
DescriptionConnector
1 Starter motorA020A
DescriptionConnector
1 Starter motorA020B
2. Undo the bolts (2a) and remove the starter motor (2b).
Refitting ( Removing ) - Place the starter motor in its housing and secure it by tightening the bolts to the recommended torque.
Value - daNmFasteningComponentØ  
.2.7BoltSTARTER MOTORM8
- Connect the electrical connections to the starter motor.
DescriptionConnector
.Starter motorA020A
DescriptionConnector
.Starter motorA020B
    See in Op. 1076B70 EXHAUST PIPE BETWEEN PRECATALYZER AND CATALYZER - R.R.     See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Lower the vehicle on the lift.- Connect the negative battery terminal.- Remove the vehicle from the lift.